Cable assemblies for gaming, arcade and entertainment machines
We coordinate harnesses, connectors and gaming machine cable assemblies for amusement machines, arcade and entertainment equipment. We work from part numbers, drawings, samples or BOM and confirm the configuration and availability with the manufacturer.
What this industry needs
What gaming machine cable assemblies need to withstand in service
An amusement machine can be in service for many hours and concentrate the intervention on the button panel, lighting, power and peripherals. The wiring must correspond to the part number, routing, interface and application conditions defined for the equipment, with identification that makes it easier to order or replace the assembly where appropriate.
- Wiring blocks identified by function
- Connectors and materials according to the handling and application expected
- Lengths and routing that allow intervention without disconnecting everything
- Identification for ordering or replacing the assembly
Industry requirements
Supply conditions for gaming machine cable assemblies
Each project can require different criteria. They are confirmed with your documentation before quoting.
- Part number and configuration defined through BOM, drawing, schematic or sample
- Connectors and materials according to the application and handling expected
- Lengths and routing compatible with the intervention space
- Interface or pin-out and manufacturer documentation where applicable
- Quantity, repeat orders and availability confirmed by the manufacturer
Supply cycle
Gaming machine cable assemblies from manufacture to replacement
The same model may need assemblies during initial manufacture, repeat supply, replacement in the installed base or the study of an alternative when a part number becomes obsolete. The JAIA sector documentation on amusement equipment and internal wiring can serve as a technical reference when it applies to the equipment.
Initial manufacture
For a new machine or series, we coordinate the supply from the part number, BOM, drawing, schematic or sample defined by the manufacturer or OEM. The manufacturer makes the assembly according to the configuration and scope agreed.
Installed base
When the equipment is already in service, we work from the identified part number or configuration to coordinate new units or replacement assemblies according to the availability confirmed by the manufacturer.
Replacement and obsolescence
If a part number is no longer available, a potentially compatible alternative can be studied. Relevant changes in interface, pin-out, length, fixing or configuration are validated by the customer or technical lead where appropriate.
Common applications
Wiring blocks in amusement machines
Most enquiries concentrate on these four blocks.
Wiring for button panels and controls of amusement machines
Wiring for buttons, push-buttons, joysticks, controllers and interaction switches, according to the part number, schematic or pin-out defined for the equipment.
When the equipment uses JAMMA or another interface or pin-out defined by the manufacturer, the harness must correspond to the specific configuration; universal compatibility between machines is not assumed.
Lighting and signalling
Cable assemblies for lighting, indicators and signalling of the equipment, with connections, routing and application conditions defined according to the project.
Internal power supply
Power interconnection between supply, boards and peripherals of the machine, according to the schematic, connectors and part numbers agreed.
Spare assemblies
Identified harnesses or assemblies to replace a specific configuration in the installed base, subject to confirmed documentation and availability.
Related information
Continue here
How we work for this industry
How we coordinate the supply for manufacturers and operators
It serves both new manufacture and maintaining an installed base, with a confirmed part number and availability.
We review the part number and documentation
We review the model, version, part number, BOM, drawing, sample and, where applicable, the interface or pin-out defined by the customer or OEM.
We identify the assembly to supply
We review which assembly the project needs and coordinate the supply from the part number, drawing, sample or documentation defined by the customer or OEM.
Validation by the customer or technical lead
When the project requires it, the customer or technical lead validates the sample, configuration or change on the equipment. Justicia Marin coordinates the supply and the agreed documentation with the manufacturer.
Supply and replacement according to availability
We coordinate the supply of the identified part number or configuration and replacements for as long as the manufacturer can maintain it. If it becomes obsolete or unavailable, an alternative can be studied for the customer to assess and validate the change where appropriate.
What we actually do in this industry
Justicia Marin is a distributor: we understand the requirement and coordinate the supply through a network of manufacturers. The manufacturer makes the assemblies and carries out the agreed tests or checks where appropriate. Justicia Marin coordinates the agreed documentation. We do not manufacture machines or cable assemblies, we have no warehouse or laboratory of our own and we issue no certificates; certificates are always those of the relevant manufacturer or supplier. We do not take part in machine design, software, prize control systems, full approval or repair on the arcade floor. Our scope is the coordinated supply of components, connectors and electrical assemblies.
Questions from the amusement sector
Gaming machine cable assemblies: frequently asked questions
- Which cable assemblies do you supply for gaming and arcade machines?
- Harnesses and assemblies for button panels, joysticks, lighting, signalling, internal power and peripherals of amusement and arcade equipment. They are made to part number, drawing, schematic or sample by a manufacturer that we select, and delivered per part number for production or as a replacement part.
- Is a JAMMA harness universally usable?
- No, not without checking. JAMMA defines a common interface, but manufacturers deviate in practice in pin-out, extra functions and lengths. That is why we always supply a harness for the specific configuration of the machine, based on a schematic, pin-out or sample, and we do not assume universal compatibility.
- Do you also supply parts for machines already in the field?
- Yes, if the part number or configuration is fixed or can be determined with a sample. Because variants within an installed base can differ, we check model and version before ordering. Delivery depends on the availability confirmed by the manufacturer; we do not hold stock of our own.
- Do you work on software or prize payout systems?
- No. We do not work on software, prize or payout systems, type approval of the complete machine or repair in the arcade. Our scope is the electrical connection technology: connectors, harnesses and assemblies according to the documentation and pin-out supplied by the manufacturer or operator.
- What do you need for a quote?
- Model and version of the machine, the part number of the harness or assembly, a bill of materials, drawing or sample, the interface or pin-out if known, the quantity and whether it concerns first production or replacement. Also say what matters most to you: cost, documentation or lead time.
- How can field faults be resolved faster?
- By dividing the wiring per function into replaceable harnesses with clear marking, so that a technician can swap one part without disconnecting everything. Criteria for marking and finish can refer to IPC/WHMA-A-620; the manufacturer or operator validates the division.
- What happens if a connector is no longer available?
- Then we study a potentially compatible alternative and document the differences in interface, pin-out, length and fixing. If the change affects operation or assembly, the customer or the responsible technician validates the alternative on the machine before it is recorded.
Do you build or operate amusement machines?
Tell us where the incidents concentrate.
If a specific block gives you recurring problems, we review it and propose a replaceable assembly that shortens the intervention.
What you can send us
- Equipment model and version
- Part number of the harness, connector or assembly
- BOM or list of materials
- Drawing, schematic or sample
- Quantity, repeat orders and whether it is initial manufacture or spare
- Interface or pin-out (JAMMA or other), if applicable
- Required standards or documentation
- Priority criterion: cost, documentation or lead time
- Target delivery date
Tell us what you need to buy
We reply within 1 working day.