Wire Cutting and Stripping Tàrrega: length, strip dimension and crimped terminals defined to your specification
Wire Cutting and Stripping Tàrrega: Wire cutting and stripping gives conductors a defined length and a clean, defined bare end; crimping then fits the terminal. Cut and strip is the first step of most cable assemblies, and crimped wire assemblies are its most common result. The customer defines cable, lengths, strip dimensions and acceptance criteria; a manufacturer selected from the network does the work. Justicia Marin is a technical distributor and supplier and has no workshop of its own. For companies in Tàrrega, Justicia Marin records the drawing, materials and quantities, checks the right manufacturer in its network and coordinates the supply. The cutting, stripping and crimping is done by the selected manufacturer; the customer approves the specification and the acceptance criteria.
The first steps of most assemblies
Wire Cutting and Stripping Tàrrega: What defines cutting, stripping and crimping
Cutting and stripping gives each conductor an exact length and removes insulation without damaging the strands. Crimping then joins the terminal to the conductor under controlled force. The quality of the crimp depends on the strip length, the strand condition, the terminal and the tool, so these are fixed together. This page covers wire cutting, stripping and crimping as a supply service, including automatic cut-and-strip and crimped wire assemblies. Soldering, marking, complete cable assemblies and wire harnesses have their own pages. Justicia Marin does not process the wire itself; it selects a manufacturer for the job and coordinates delivery. Terminal, tool and setting follow the terminal manufacturer’s data and the customer’s drawing. It is not assumed that every manufacturer processes every terminal with the prescribed tool.
- Wire type, cross-section and insulation
- Cut length and tolerance
- Strip length at each end
- Terminal reference and applicator or tool
- Crimp checks: height, appearance, pull force
- Quantities, packaging and call-off
Length, strip and crimp
Wire Cutting and Stripping Tàrrega: what to define before the request
A poor crimp cannot be recognised at a glance. Quotes are only comparable when terminal, tool and checks are described beforehand. The following four decisions should be settled before the request, so that part, price and inspection describe the same result.
Wire and terminal
The customer names wire type, cross-section and terminal reference. The manufacturer confirms that the terminal is approved for that cross-section and reports mismatches instead of swapping parts.
Tool and setting
The terminal manufacturer prescribes tool and setting. The manufacturer confirms it has the tooling; an alternative is not treated as equivalent and goes back to the customer for approval.
Strip length and condition
Strip length and strand condition determine crimp quality. They are agreed with the cutting and stripping step and checked on a sample.
Checks and records
Crimp height, appearance and, where agreed, pull force are typical checks. What is checked, and how often, is written into the order and documented by the manufacturer.
Details for the quotation
Wire Cutting and Stripping Tàrrega: what to send for a quotation
The manufacturer must know wire, terminal and checks. A list of items with references reduces the quotation to a few questions. If a dimension or a criterion is missing, we point it out before the request goes to the manufacturer. We do not replace the customer’s documents with assumptions that have not been approved.
- Wire type and cross-section
- Cut length and tolerance
- Strip length at each end
- Terminal reference and tool
- Crimp checks and frequency
- Quantities, packaging and call-off
Projects in Tàrrega
Wire Cutting and Stripping Tàrrega: project requirements and regional context
Tàrrega is a city in Catalonia, Spain. Industrial activity in and around the city includes agricultural machinery, machine building and metalworking, which creates demand from agricultural-machinery makers, machine builders and contract manufacturers. Context: Catalonia (Spain). Tàrrega lies about 90 km west of Barcelona and about 40 km east of Lleida. Tàrrega has a population of about 19,000 (2025). Tàrrega is part of Urgell, within the Province of Lleida. Around Tàrrega, the machinery sector is where most requests start from a drawing and a bill of materials, with variants that have to remain consistent. If the request comes from a company in the “agricultural machinery” sector in Tàrrega, the following applies: wire, terminal and checks follow the specification, not the delivery address. The presence of an industry in the area does not mean that Justicia Marin has a site, production or customers there. The manufacturer is selected for demonstrated capability against the specification, not for proximity. Regional reference: Tàrrega: official website.
Manufacturer data
The terminal manufacturer’s data on tool, cross-section and crimp dimension is the basis. If the drawing deviates, this is clarified before production, not bridged with an own interpretation.
Validated sample
The crimp is checked on a sample before the series, against the agreed characteristics. The customer approves it; no batch is committed without that validation.
Agreed inspection
The manufacturer checks what was agreed and documents it. Justicia Marin coordinates the documents; the assessment in the equipment stays with the customer.
From specification to series
Wire Cutting and Stripping Tàrrega: from list to batch
We clarify wire, terminal and checks with the customer, consult manufacturers about tooling and samples, and coordinate the batch.
Receive the list
The customer sends the list with wire, lengths, strip dimensions, terminal references, checks and quantities.
Consult manufacturers
Justicia Marin asks a suitable manufacturer about terminals, tooling and checks it can carry out.
Check a sample
By agreement, the manufacturer produces a sample; the customer checks it before committing the batch.
Supply and repeat
The manufacturer produces the batches with the checked configuration. Justicia Marin coordinates documents and delivery.
Responsibilities
Wire Cutting and Stripping Tàrrega: who defines, who manufactures, who accepts
Justicia Marin is a technical distributor and coordinates the supply; it is not the workshop that carries out the cutting, stripping and crimping. We record the list, consult the right manufacturer and coordinate sample, quotation and supply. The selected manufacturer works and documents the agreed inspections; the customer remains the owner of the drawing and accepts the result.
The customer defines
Defines wire, lengths, terminal, tool and checks; approves alternatives and the sample; validates the result in the equipment.
Justicia Marin coordinates
Analysis — wire, terminal and checks
Selection — manufacturer and tooling
Start — sample and release
Delivery — documents, revisions and delivery
The manufacturer executes
The selected manufacturer cuts, strips and crimps with the prescribed tool, checks the agreed characteristics, documents the result and reports before the start if wire, terminal or tool do not match.
Justicia Marin coordinates the supply. It has no workshop, crimping machines or laboratory of its own and does not issue certificates. Cutting, stripping, crimping and the agreed checks are carried out by the selected manufacturer; the drawing and the final validation stay with the customer.
Go deeper
Soldering, marking and complete assemblies
Scope of supply
Justicia Marin coordinates the supply. It has no workshop, crimping machines or laboratory of its own and does not issue certificates. Cutting, stripping, crimping and the agreed checks are carried out by the selected manufacturer; the drawing and the final validation stay with the customer.
Questions about wire cutting, stripping and crimping
Questions about Wire Cutting and Stripping Tàrrega
- What do wire cutting and stripping include?
- Cutting wire or cable to length and removing the insulation to a defined strip length without damaging the strands, usually followed by crimping a terminal. The customer defines lengths and criteria; a manufacturer selected from the network does the work, and Justicia Marin coordinates the order.
- What is needed to quote cut, strip and crimp work?
- The wire type and cross-section, cut length and tolerance, strip length at each end, the terminal reference and prescribed tool, the crimp checks and their frequency, and the quantities with packaging and call-off. Justicia Marin checks completeness and clarifies open points first.
- How is a good crimp recognised?
- By agreed characteristics such as crimp height, appearance and, where specified, pull force, measured to the terminal manufacturer’s data on a sample and during the batch. The manufacturer documents the results. A crimp without defined checks cannot be judged reliably from the outside.
- Can another terminal or tool be used?
- Only with the customer’s approval and, where prescribed, in a combination released by the terminal manufacturer. An alternative terminal or tool is not treated as equivalent. The manufacturer reports the constraint and proposes options with their differences; the customer decides. The agreed points are recorded in writing in the quotation.
- Does Justicia Marin cut, strip and crimp the wire itself?
- No. Justicia Marin is a technical B2B distributor and supplier. It selects a manufacturer for the job, compares offers and coordinates samples, documents and delivery. The manufacturer does the processing and the agreed checks; the customer owns the specification. The basis remains the approved drawing with its revision status.
- Do the criteria change for a project in Tàrrega?
- No, the criteria are those of the product. Tàrrega is a city in Catalonia, Spain. Industrial activity in and around the city includes agricultural machinery, machine building and metalworking, which creates demand from agricultural-machinery makers, machine builders and contract manufacturers. Tàrrega lies about 90 km west of Barcelona and about 40 km east of Lleida. A company in the “agricultural machinery” sector in Tàrrega submits drawing, materials and expected results like any other customer. Justicia Marin does not claim local production: it asks manufacturers about the required capability and coordinates delivery to the agreed destination.
- How do you request wire cutting and stripping in Tàrrega?
- A company in Tàrrega sends the drawing and quantities, with the acceptance criteria and the intended use. Industries named for Tàrrega include agricultural machinery, machine building and metalworking; if the project belongs to one of them, a note in the request helps. Reference: population of about 19,000 (2025). Justicia Marin clarifies open points, consults a manufacturer in the network and, where needed, coordinates samples or a first lot. The manufacturer carries out the supply physically; the customer accepts the result before follow-on deliveries start.
Do you need wire cutting and stripping in Tàrrega?
Send the list with wire types and terminals.
With checks, quantities and the expected inspection, the scope can be defined and a manufacturer consulted.
Useful details
- Wire type and cross-section
- Cut length and tolerance
- Strip length
- Terminal and tool
- Crimp checks
- Quantities and call-off
Request a quote
We review the documents and name open points before a quotation is prepared.